Z-MR Firmware Download

How to Update via Web UI:

1. Download the desired firmware version below (saves as z-mr.signed.bin)
2. Ensure your Z-MR device is powered on and connected to your network
3. Open your web browser and navigate to your Z-MR device's web interface:
   • Find your device's IP address (check your router or use network scanning)
   • Or use mDNS if configured: http://z-mr.local
4. Navigate to the firmware update section in the web UI
5. Click "Choose File" or "Browse" and select the downloaded z-mr.signed.bin file
6. Click "Upload" or "Update Firmware"
7. Wait for the upload to complete (progress bar will show status)
8. The device will automatically validate and flash the firmware
9. Device will reboot with the new firmware when complete

Note: Do not power off the device during the update process. If validation fails, the device will remain on the current firmware.